Lead free hot air reflow soldering for LED production line
Product Description
Main product : reflow oven, smt reflow oven, reflow solder, reflow soldering,smt mounter,Smt Pick and Place Machine,Smt Placement Machine,Smt Mounting Machine, Pcb Machine,Smt Equipments
Specification:
| Model | YUSH-AD8 |
| Outside dimension | 4200*700*1320mm |
| Standard color | computer grey |
| Weight | 800KG |
| Number of heating zones | up8/bottom 8 |
| Number of cooling zones | 1 |
| Length of heating zones | 2800mm |
| Electric supply required | 5 line 3 phase 380V 50/60 HZ |
| Warming time | Approx. 20 mins |
| Heating time | Up:hot air; bottom: IR |
| Temperature setting range | Room temp. -350 Degrees Celsius |
| Control system | PID+SSR/PLC+PC |
| Temperature control method | PID Close loop control&SSR Driving |
| Temperature control precision | ±1.0 Degrees Celsius |
| Temperature deviation on PCB | ±2.0 Degrees Celsius |
| Data storage | Process data and status storage(80 GB) |
| Abnormal alarm | Abnormal temp.(extra-high/extra -low temperature) |
| Board dropped alarm | Tower light:yellow-warming;green-normal;red-abnormal |
| Max. Width of pcb | 320mm |
| Conveyor height | 880±20mm |
| Conveyor direction | L-R/R-L |
| Conveyor speed range | 0-1500mm |
| Pcb transmission agent | Mesh |
| Normal power | 5.5KW |
| Start-up power | 24KW |
Features:
1. Heating system adopts Lead smt Patent Heating technology.
2. Hot air no-contact output supported by imported large current solid-state relay, safe and reliable, meanwhile equipped with special SSR radiator, greatly improve the cooling efficiency, enjoy loner lifetime of the machine.
3. Heating devices used high quality components; ensure the whole system goes smoothly.
4. Combined with temperature controller PID fuzzy control function, has been monitoring the change of the ambient temperature and heat value ,with the minimum pulse control heating device , fast response, guarantee the temperature control precision ,minimize temperature distribution differences inside the oven ,the length direction of the temperature distribution accords to IPC STANDARDS .
5. Heating zone Module design, convenient for maintenance.
6. Sound and Light alarm when the temperature beyond the limit, with error analysis functions.
7. With small hot air cycle system design, up and down heating, good thermal compersation, perfect hot source efficiency, warm-up fast, suitable for BGA, CSP and 0201 ect, components solder welding .Unique forced hot air cycle structure, make components on PCB heated evenly.
8. Winding system adopts advanced wind air channel, working uniformly, with high hot source exchange.
9. Pre-heating zone, welding zone, cooling zone, cooling zone, up and down heating separately, independent cycle and temperature control, adjacent/beside zone temperature difference maximum value can reach 100 °C .No temperature exchange between zones, each zone temperature and wind speed can be adjusted.
10.Imported high temperature resistant motor straightly drive the hot air recycle, good heating balance, run smoothly, long lifetime, low noise, shock less .
11. Zones power match properly, warm-up fast, from room temperature to working temperature need 20 minutes, with hot source compensation function
12. Independent cooling zone, ensure the low temperature when PCB come out.
13. Transmission system adopts Japanese Frequency Motor, combined with 1:150 imported turbine reducer, running stably, the speed of 0-1500mm/min is adjustable.
14. Standing supported by independent wheels, with special stainless steel mesh belt, durable wearing resistant, especially for BGA, CSP and 0201 welding.
Product Tags:
|
|
PID SSR Temperature Control Solder Reflow Oven For LED Production Line Images
|
